On Tue, Jul 19, 2022 at 4:58 PM Khem Raj <raj.khem@...> wrote:
>
> On Tue, Jul 19, 2022 at 10:48 AM Bartosz Golaszewski <brgl@...> wrote:
> >
> > On Tue, Jul 19, 2022 at 2:54 PM Khem Raj <raj.khem@...> wrote:
> > >
> > >
> > >
> > > On Tue, Jul 19, 2022 at 3:40 AM Bartosz Golaszewski <brgl@...> wrote:
> > >>
> > >> On Tue, Jul 19, 2022 at 12:10 AM Jon Mason <jdmason@...> wrote:
> > >> >
> > >> > On Mon, Jul 18, 2022 at 4:06 PM Khem Raj <raj.khem@...> wrote:
> > >> > >
> > >> > > Can you try something like this
> > >> > >
> > >> > > diff --git a/meta/recipes-devtools/gcc/gcc-runtime.inc
> > >> > > b/meta/recipes-devtools/gcc/gcc-runtime.inc
> > >> > > index 5d74e4494d..61d5bf6058 100644
> > >> > > --- a/meta/recipes-devtools/gcc/gcc-runtime.inc
> > >> > > +++ b/meta/recipes-devtools/gcc/gcc-runtime.inc
> > >> > > @@ -68,8 +68,7 @@ do_configure () {
> > >> > >     # libstdc++ isn't built yet so CXX would error not able to find it
> > >> > > which breaks stdc++'s configure
> > >> > >     # tests. Create a dummy empty lib for the purposes of configure.
> > >> > >     mkdir -p ${WORKDIR}/dummylib
> > >> > > -   touch ${WORKDIR}/dummylib/dummylib.c
> > >> > > -   ${CC} ${WORKDIR}/dummylib/dummylib.c -shared -o
> > >> > > ${WORKDIR}/dummylib/libstdc++.so
> > >> > > +   ${CC} -nostartfiles -shared -x c /dev/null -o
> > >> > > ${WORKDIR}/dummylib/libstdc++.so
> > >> > >     for d in libgcc ${RUNTIMETARGET}; do
> > >> > >         echo "Configuring $d"
> > >> > >         rm -rf ${B}/${TARGET_SYS}/$d/
> > >> > >
> > >> > >
> > >> > > and see if it helps ?
> > >> >
> > >> > That appears to work for the 2 zephyr machines in meta-arm
> > >> >
> > >>
> > >> This still fails for arduino nano 33 ble:
> > >>
> > >> | checking for dirent.h... no
> > >> | checking sys/statvfs.h usability... no
> > >> | checking sys/statvfs.h presence... no
> > >> | checking for sys/statvfs.h... no
> > >> | checking utime.h usability... yes
> > >> | checking utime.h presence... yes
> > >> | checking for utime.h... yes
> > >> | checking whether to build Filesystem TS support... no
> > >> | checking for struct dirent.d_type... no
> > >> | checking for realpath... no
> > >> | checking for utimensat... no
> > >> | checking for utime... no
> > >> | checking for lstat... no
> > >> | checking for struct stat.st_mtim.tv_nsec... yes
> > >> | checking for fchmod... yes
> > >> | checking for fchmodat... yes
> > >> | checking for sendfile that can copy files... no
> > >> | checking for link... yes
> > >> | checking for readlink... yes
> > >> | checking for symlink... yes
> > >> | checking for truncate... yes
> > >> | checking for fdopendir... no
> > >> | checking for dirfd... no
> > >> | checking for unlinkat... yes
> > >> | checking __sync extensions... yes
> > >> | checking link.h usability... no
> > >> | checking link.h presence... no
> > >> | checking for link.h... no
> > >> | checking for fcntl... configure: error: Link tests are not allowed
> > >> after GCC_NO_EXECUTABLES.
> > >
> > >
> > >
> > > Can you post config.log from this component
> > >
> >
> > Here you go: https://pastebin.com/6KMD9PhX
>
> this one has succeeded. I guess there are multiple config.log files in
> your build tree. Perhaps the one which shows exit 1 at the end is one
> I am interested in.
>
> >
> > Bart

I don't see any config.h that would fail and I just ran a clean build.

| DEBUG: Executing python function extract_stashed_builddir
| DEBUG: sed -e
's:^[^/]*/:/home/brgl/workspace/zephyr-yocto/build/tmp-newlib/work/armv7m-yocto-eabi/gcc-runtime/12.1.0-r0/gcc-12.1.0/build.arm-yocto-eabi.arm-yocto-eabi/:g'
/home/brgl/workspace/zephyr-yocto/build/tmp-newlib/sysroots-components/x86_64/gcc-stashed-builddir-arm-yocto-eabi/fixmepath
| xargs sed -i -e
's:FIXMESTAGINGDIRTARGET:/home/brgl/workspace/zephyr-yocto/build/tmp-newlib/work/armv7m-yocto-eabi/gcc-runtime/12.1.0-r0/recipe-sysroot:g;
s:FIXMESTAGINGDIRHOST:/home/brgl/workspace/zephyr-yocto/build/tmp-newlib/work/armv7m-yocto-eabi/gcc-runtime/12.1.0-r0/recipe-sysroot-native:g'
-e 's:FIXME_PSEUDO_SYSROOT:/home/brgl/workspace/zephyr-yocto/build/tmp-newlib/sysroots-components/x86_64/pseudo-native:g'
-e 's:FIXME_HOSTTOOLS_DIR:/home/brgl/workspace/zephyr-yocto/build/tmp-newlib/hosttools:g'
-e 's:FIXME_PKGDATA_DIR:/home/brgl/workspace/zephyr-yocto/build/tmp-newlib/pkgdata/arduino-nano-33-ble:g'
-e 's:FIXME_PSEUDO_LOCALSTATEDIR:/home/brgl/workspace/zephyr-yocto/build/tmp-newlib/work/armv7m-yocto-eabi/gcc-runtime/12.1.0-r0/pseudo/:g'
-e 's:FIXME_LOGFIFO:/home/brgl/workspace/zephyr-yocto/build/tmp-newlib/work/armv7m-yocto-eabi/gcc-runtime/12.1.0-r0/temp/fifo.385595:g'

This makes me think that it fails after configure?

Bart